Window tints will eventually wear away regardless of whether they are expensive or not; whether they’re from a reputable window tint Norwalk company. Discoloration and formation of bubbles are among the most noticeable signs you could encounter that indicate that you must replace your window tints. Replacing is generally handled by experts to avoid a mess when installing and removing window tints. However, if you have to postpone the timetable to replace your tint, it is possible to remove the old tints to avoid obstructing your vision.
What are the things you need
- Razor Blades
- Dishwashing soap
- Soft cloth
- Spray bottle
- Glass Cleaner
What to do
When you have all the supplies, simply go through these steps.
Take a small section from the corner of the film
Utilizing the razor blade, create a small cut on the corner of the film. As long as the blade isn’t pressed too much, your windshield or windows will not be easily scratched.
Slowly peel the film off
Slowly peel the window tint beginning from the corner you have cut off. Try to do this step slowly to ensure that you take off all the window tints at once. If the film has not been completely removed, you can employ the blade of a razor to lift the edges. After that, you can continue peeling until everything is gone.
Spray soapy water mix on windows
Mix a small amount of dishwashing soap with water in a spray bottle. It doesn’t matter how precise you are in your measurements. It doesn’t matter how much soapy it is. Once you are done preparing the mixture, apply large amounts of it onto the surfaces that will be exposed to adhesive.
Allow it to sit and soak
Let the soapy mixture rest for a while before spraying it. This allows the soapy water to soften the adhesive and allows it to be easier to move into the next step.
Scrape the adhesives left behind
To remove the adhesive residue from the glass, you will require a razor. If you are worried about scratching your windows, you only need to gently scrape them off and ensure that the glass is wet enough. Spray a second soapy solution to remove any residue if the glass begins drying.
Clean the windows
After you’ve completely gotten rid of the tint and its adhesive residue, make sure to clean your windows. All you require is a glass cleaner along with a soft cloth and an easy cloth to wash your windows. You could also make use of dishwashing soap-water mix if you don’t have glass cleaner. You should avoid using ammonia-based cleaners. Avoid making use of abrasive cleaners as they could cause scratches.
It’s not difficult to take off old window tints. This will prepare your vehicle to receive a brand-new tint. Just remember to be careful not to scratch your windows to ensure that your new window tints will be just as smooth and perfect.
If you want to be sure that your window tint replacement is done properly, you can rely on an auto window tinting Camarillo service to do the job for you. Visit KEPLER Coatings to know more about their services.